Details
Standard product :
USB 2.0 shielded cable.
USB A male connector.
2mm pitch, 1x5 way or 1x4 female connector (other sizes available).
Available in custom lengths.
Connector configuration
These cables are fitted with a 2mm pitch, single row connector.
This will fit onto a 2mm pitch pin header.
The cables can also be supplied with specific branded connectors for example Molex milli-grid or Harwin M22 types.
The configuration of the wires in the pin header is normally as shown below.
Customer specific configurations can also be supplied.
Pin 1: 5V
Pin 2:Data -
Pin 3:Data+
Pin 4: Ground and Shield ground.
Pin 5: NC (not required as shield is connected to pin 4).