Standard product :
USB 2.0 shielded cable.
available in custom lengths.
Connector 1: 2mm pitch, 1x5 way or 1x4 way female connector.
Connector 2: 2mm pitch, 1x5 way or 1x4 way female connector.
These cables feature 2mm pitch connectors at both ends.
The cables can also be supplied with specific branded connectors for example Molex milli-grid or Harwin M22 types.
The normal configuration of the pin header connection is as shown below.
Custom configurations are available on request.
Pin 1: 5V
Pin 2:Data -
Pin 4: Ground and Shield ground.
Pin 5: NC (not required as shield is connected to GND via pin 4).