Details
USB 2.0 shielded cable.
USB 2.0 2.54mm pitch 2x5 way pin header connector.
Two Molex 1.25mm pitch picoblade connector.
Custom lengths available.
This cable will allow a device with an 8/9/10 pin 2.54mm pitch USB 2.0 connector to be connected to two 4 pin molex picoblade type USB ports. These picoblade connectors are found on Intel NUC computers. The cables are also suitable for other equipment with picoblade USB ports.
Connector configurations
The connectors on these cables are normally configured as shown below.
Custom configurations and different sized connectors also available.
Picoblade connectors
Pin 1: +5V
Pin 2: Data-
Pin 3: Data+
Pin 4: Ground and shield ground.
2.54mm pitch 2x5 way connector
Pin 1: +5V
Pin 3: Data-
Pin 5: Data+
Pin 7: Ground and shield ground.
Pin 9: NC (not required as shield is connected to pin 4).
Pin 2: +5V
Pin 4: Data-
Pin 6: Data+
Pin 8: Ground and shield ground.
Pin 10: NC (not required as shield is connected to pin 8).